| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds read vulnerability in the graphics module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| EVerest is an EV charging software stack. Prior to version 2025.12.0, `is_message_crc_correct` in the DZG_GSH01 powermeter SLIP parser reads `vec[vec.size()-1]` and `vec[vec.size()-2]` without checking that at least two bytes are present. Malformed SLIP frames on the serial link can reach `is_message_crc_correct` with `vec.size() < 2` (only via the multi-message path), causing an out-of-bounds read before CRC verification and `pop_back` underflow. Therefore, an attacker controlling the serial input can reliably crash the process. Version 2025.12.0 fixes the issue. |
| A flaw was found in WebKitGTK and WPE WebKit. This vulnerability allows an out-of-bounds read and integer underflow, leading to a UIProcess crash (DoS) via a crafted payload to the GLib remote inspector server. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix potential array out of bounds access
Account for IWL_SEC_WEP_KEY_OFFSET when needed while verifying
key_len size in iwl_mvm_sec_key_add(). |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: fix kasan splat when generating ipv4 pmtu error
If we try to emit an icmp error in response to a nonliner skb, we get
BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
kasan_report+0x105/0x140
ip_compute_csum+0x134/0x220
iptunnel_pmtud_build_icmp+0x554/0x1020
skb_tunnel_check_pmtu+0x513/0xb80
vxlan_xmit_one+0x139e/0x2ef0
vxlan_xmit+0x1867/0x2760
dev_hard_start_xmit+0x1ee/0x4f0
br_dev_queue_push_xmit+0x4d1/0x660
[..]
ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck. |
| A flaw was found in the libssh library in versions less than 0.11.2. An out-of-bounds read can be triggered in the sftp_handle function due to an incorrect comparison check that permits the function to access memory beyond the valid handle list and to return an invalid pointer, which is used in further processing. This vulnerability allows an authenticated remote attacker to potentially read unintended memory regions, exposing sensitive information or affect service behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt76x0: fix oob access in mt76x0_phy_get_target_power
After 'commit ba45841ca5eb ("wifi: mt76: mt76x02: simplify struct
mt76x02_rate_power")', mt76x02 relies on ht[0-7] rate_power data for
vht mcs{0,7}, while it uses vth[0-1] rate_power for vht mcs {8,9}.
Fix a possible out-of-bound access in mt76x0_phy_get_target_power routine. |
| Out-of-bounds read in parsing audio data in libsavsac.so prior to SMR Apr-2025 Release 1 allows local attackers to read out-of-bounds memory. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to version 2.3.1.3, there is a vulnerability IccCmm.cpp:5793 when reading through index during ICC profile processing. The malformed ICC profile triggers improper array bounds validation in the color management module, resulting in an out-of-bounds read that can lead to memory disclosure or segmentation fault from accessing memory beyond the array boundary. This issue has been patched in version 2.3.1.3. |
| RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. In version 2025.10 and prior, multiple out-of-bounds read allow any unauthenticated user, with ability to send or manipulate input packets, to read adjacent memory locations, or crash a vulnerable device running the 6LoWPAN stack. The received packet is cast into a sixlowpan_sfr_rfrag_t struct and dereferenced without validating the packet is large enough to contain the struct object. At time of publication, no known patch exists. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, an out-of-bounds read vulnerability was reported in the BLE ATT Prepare Write handling of the BLE provisioning transport (protocomm_ble). The issue can be triggered by a remote BLE client while the device is in provisioning mode. The transport accumulated prepared-write fragments in a fixed-size buffer but incorrectly tracked the cumulative length. By sending repeated prepare write requests with overlapping offsets, a remote client could cause the reported length to exceed the allocated buffer size. This inflated length was then passed to provisioning handlers during execute-write processing, resulting in an out-of-bounds read and potential memory corruption. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7. |
| Out-of-bounds read in enrollment with cdsp frame secfr trustlet prior to SMR Apr-2025 Release 1 allows local privileged attackers to read out-of-bounds memory. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
This patch fixes a shift-out-of-bounds in brcmfmac that occurs in
BIT(chiprev) when a 'chiprev' provided by the device is too large.
It should also not be equal to or greater than BITS_PER_TYPE(u32)
as we do bitwise AND with a u32 variable and BIT(chiprev). The patch
adds a check that makes the function return NULL if that is the case.
Note that the NULL case is later handled by the bus-specific caller,
brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example.
Found by a modified version of syzkaller.
UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
shift exponent 151055786 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
dump_stack_lvl+0x57/0x7d
ubsan_epilogue+0x5/0x40
__ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb
? lock_chain_count+0x20/0x20
brcmf_fw_alloc_request.cold+0x19/0x3ea
? brcmf_fw_get_firmwares+0x250/0x250
? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0
brcmf_usb_get_fwname+0x114/0x1a0
? brcmf_usb_reset_resume+0x120/0x120
? number+0x6c4/0x9a0
brcmf_c_process_clm_blob+0x168/0x590
? put_dec+0x90/0x90
? enable_ptr_key_workfn+0x20/0x20
? brcmf_common_pd_remove+0x50/0x50
? rcu_read_lock_sched_held+0xa1/0xd0
brcmf_c_preinit_dcmds+0x673/0xc40
? brcmf_c_set_joinpref_default+0x100/0x100
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lock_acquire+0x19d/0x4e0
? find_held_lock+0x2d/0x110
? brcmf_usb_deq+0x1cc/0x260
? mark_held_locks+0x9f/0xe0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? _raw_spin_unlock_irqrestore+0x47/0x50
? trace_hardirqs_on+0x1c/0x120
? brcmf_usb_deq+0x1a7/0x260
? brcmf_usb_rx_fill_all+0x5a/0xf0
brcmf_attach+0x246/0xd40
? wiphy_new_nm+0x1476/0x1d50
? kmemdup+0x30/0x40
brcmf_usb_probe+0x12de/0x1690
? brcmf_usbdev_qinit.constprop.0+0x470/0x470
usb_probe_interface+0x25f/0x710
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
? usb_match_id.part.0+0x88/0xc0
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __mutex_unlock_slowpath+0xe7/0x660
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_set_configuration+0x984/0x1770
? kernfs_create_link+0x175/0x230
usb_generic_driver_probe+0x69/0x90
usb_probe_device+0x9c/0x220
really_probe+0x1be/0xa90
__driver_probe_device+0x2ab/0x460
driver_probe_device+0x49/0x120
__device_attach_driver+0x18a/0x250
? driver_allows_async_probing+0x120/0x120
bus_for_each_drv+0x123/0x1a0
? bus_rescan_devices+0x20/0x20
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? trace_hardirqs_on+0x1c/0x120
__device_attach+0x207/0x330
? device_bind_driver+0xb0/0xb0
? kobject_uevent_env+0x230/0x12c0
bus_probe_device+0x1a2/0x260
device_add+0xa61/0x1ce0
? __fw_devlink_link_to_suppliers+0x550/0x550
usb_new_device.cold+0x463/0xf66
? hub_disconnect+0x400/0x400
? _raw_spin_unlock_irq+0x24/0x30
hub_event+0x10d5/0x3330
? hub_port_debounce+0x280/0x280
? __lock_acquire+0x1671/0x5790
? wq_calc_node_cpumask+0x170/0x2a0
? lock_release+0x640/0x640
? rcu_read_lock_sched_held+0xa1/0xd0
? rcu_read_lock_bh_held+0xb0/0xb0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
process_one_work+0x873/0x13e0
? lock_release+0x640/0x640
? pwq_dec_nr_in_flight+0x320/0x320
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x8b/0xd10
? __kthread_parkme+0xd9/0x1d0
? pr
---truncated--- |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If t
he fields of PID_IDENTITY_TOKEN or PID_PERMISSION_TOKEN in the DATA Submessage — specifically by tampering with the length
field in readPropertySeq — are modified, an integer overflow occurs, leading to an OOM during the resize operation. Versi
ons 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
| An out-of-bounds read in the mk_ptr_to_buf in mk_core function (mk_memory.c) of monkey commit f37e984 allows attackers to cause a Denial of Service (DoS) via sending a crafted HTTP request to the server. |
| An out-of-bounds read in the mk_vhost_fdt_close function (mk_server/mk_vhost.c) of monkey commit f37e984 allows attackers to cause a Denial of Service (DoS) via sending a crafted HTTP request to the server. |
| An out-of-bounds read in the http_parser_transfer_encoding_chunked function (mk_server/mk_http_parser.c) of monkey commit f37e984 allows attackers to cause a Denial of Service (DoS) via sending a crafted POST request to the server. |
| An out-of-bounds read in the mk_mimetype_find function (mk_server/mk_mimetype.c) of monkey commit f37e984 allows attackers to cause a Denial of Service (DoS) via sending a crafted HTTP request to the server. |
| An out-of-bounds read in the header_cmp function (mk_server/mk_http_parser.c) of monkey commit f37e984 allows attackers to cause a Denial of Service (DoS) via sending a crafted HTTP request to the server. |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group
). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an
SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If t
he fields of PID_IDENTITY_TOKEN or PID_PERMISSION_TOKEN in the DATA Submessage — specifically by tampering with the length
field in readBinaryPropertySeq — are modified, an integer overflow occurs, leading to an OOM during the resize operation.
Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue. |
