| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit
Syzbot points out that skb_trim() has a sanity check on the existing length of
the skb, which can be uninitialised in some error paths. The intent here is
clearly just to reset the length to zero before resubmitting, so switch to
calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length()
already contains a call to skb_reset_tail_pointer(), so remove the redundant
call.
The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar
usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it. |
| In the Linux kernel, the following vulnerability has been resolved:
um: line: always fill *error_out in setup_one_line()
The pointer isn't initialized by callers, but I have
encountered cases where it's still printed; initialize
it in all possible cases in setup_one_line(). |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
This avoids warning:
[ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
Caused by get_c0_compare_int on secondary CPU.
We also skipped saving IRQ number to struct clock_event_device *cd as
it's never used by clockevent core, as per comments it's only meant
for "non CPU local devices". |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qedi: Fix crash while reading debugfs attribute
The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly
on a __user pointer, which results into the crash.
To fix this issue, use a small local stack buffer for sprintf() and then
call simple_read_from_buffer(), which in turns make the copy_to_user()
call.
BUG: unable to handle page fault for address: 00007f4801111000
PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0
Oops: 0002 [#1] PREEMPT SMP PTI
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023
RIP: 0010:memcpy_orig+0xcd/0x130
RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202
RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f
RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000
RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572
R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff
R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af
FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x183/0x510
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x22/0x30
? memcpy_orig+0xcd/0x130
vsnprintf+0x102/0x4c0
sprintf+0x51/0x80
qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324]
full_proxy_read+0x50/0x80
vfs_read+0xa5/0x2e0
? folio_add_new_anon_rmap+0x44/0xa0
? set_pte_at+0x15/0x30
? do_pte_missing+0x426/0x7f0
ksys_read+0xa5/0xe0
do_syscall_64+0x58/0x80
? __count_memcg_events+0x46/0x90
? count_memcg_event_mm+0x3d/0x60
? handle_mm_fault+0x196/0x2f0
? do_user_addr_fault+0x267/0x890
? exc_page_fault+0x69/0x150
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4800f20b4d |
| n8n is an open source workflow automation platform. Versions 0.123.1 through 1.119.1 do not have adequate protections to prevent RCE through the project's pre-commit hooks. The Add Config operation allows workflows to set arbitrary Git configuration values, including core.hooksPath, which can point to a malicious Git hook that executes arbitrary commands on the n8n host during subsequent Git operations. Exploitation requires the ability to create or modify an n8n workflow using the Git node. This issue is fixed in version 1.119.2. Workarounds include excluding the Git Node (Docs) and avoiding cloning or interacting with untrusted repositories using the Git Node. |
| In AzeoTech DAQFactory release 20.7 (Build 2555), an Access of Uninitialized Pointer vulnerability can be exploited by an attacker which can lead to arbitrary code execution. |
| Improper input validation in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (toctou) race condition in NtQueryInformation Token function (ntifs.h) allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Windows DWM allows an authorized attacker to elevate privileges locally. |
| Untrusted pointer dereference in Windows Device Association Broker service allows an authorized attacker to elevate privileges locally. |
| Microsoft is aware of vulnerabilities in the third party Agere Modem driver that ships natively with supported Windows operating systems. This is an announcement of the upcoming removal of ltmdm64.sys driver. The driver has been removed in the October cumulative update.
Fax modem hardware dependent on this specific driver will no longer work on Windows.
Microsoft recommends removing any existing dependencies on this hardware. |
| Untrusted pointer dereference in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
| Untrusted pointer dereference in Windows Routing and Remote Access Service (RRAS) allows an authorized attacker to elevate privileges locally. |
| Untrusted pointer dereference in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. |
| Untrusted pointer dereference in Microsoft Office Excel allows an unauthorized attacker to disclose information over a network. |
| Untrusted pointer dereference in Storvsp.sys Driver allows an authorized attacker to deny service locally. |
| Untrusted pointer dereference in Windows Remote Desktop allows an authorized attacker to elevate privileges locally. |
| FACTION is a PenTesting Report Generation and Collaboration Framework. Prior to version 1.7.1, an extension execution path in Faction’s extension framework permits untrusted extension code to execute arbitrary system commands on the server when a lifecycle hook is invoked, resulting in remote code execution (RCE) on the host running Faction. Due to a missing authentication check on the /portal/AppStoreDashboard endpoint, an attacker can access the extension management UI and upload a malicious extension without any authentication, making this vulnerability exploitable by unauthenticated users. This issue has been patched in version 1.7.1. |
| The Static Asset API in Mintlify Platform before 2025-11-15 allows remote attackers to inject arbitrary web script or HTML via the subdomain parameter because any tenant's assets can be served on any other tenant's documentation site. |
| theshit is a command-line utility that automatically detects and fixes common mistakes in shell commands. Prior to version 0.1.1, the application loads custom Python rules and configuration files from user-writable locations (e.g., `~/.config/theshit/`) without validating ownership or permissions when executed with elevated privileges. If the tool is invoked with `sudo` or otherwise runs with an effective UID of root, it continues to trust configuration files originating from the unprivileged user's environment. This allows a local attacker to inject arbitrary Python code via a malicious rule or configuration file, which is then executed with root privileges. Any system where this tool is executed with elevated privileges is affected. In environments where the tool is permitted to run via `sudo` without a password (`NOPASSWD`), a local unprivileged user can escalate privileges to root without additional interaction. The issue has been fixed in version 0.1.1. The patch introduces strict ownership and permission checks for all configuration files and custom rules. The application now enforces that rules are only loaded if they are owned by the effective user executing the tool. When executed with elevated privileges (`EUID=0`), the application refuses to load any files that are not owned by root or that are writable by non-root users. When executed as a non-root user, it similarly refuses to load rules owned by other users. This prevents both vertical and horizontal privilege escalation via execution of untrusted code. If upgrading is not possible, users should avoid executing the application with `sudo` or as the root user. As a temporary mitigation, ensure that directories containing custom rules and configuration files are owned by root and are not writable by non-root users. Administrators may also audit existing custom rules before running the tool with elevated privileges. |
