| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The affected devices do not validate the server certificate when connecting to the SolaX Cloud MQTTS server hosted in the Alibaba Cloud (mqtt001.solaxcloud.com, TCP 8883). This allows attackers in a man-in-the-middle position to act as the legitimate MQTT server and issue arbitrary commands to devices. |
| An improper certificate validation vulnerability in PAN-OS allows users to connect Terminal Server Agents on Windows to PAN-OS using expired certificates even if the PAN-OS configuration would not normally permit them to do so. |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. From 1.2.8 through 1.2.10, an authentication bypass vulnerability in FUXA allows an unauthenticated, remote attacker to execute arbitrary code on the server when the Node-RED plugin is enabled. This has been patched in FUXA version 1.2.11. |
| Improper certificate validation in Azure Local allows an unauthorized attacker to execute code over a network. |
| Tanium addressed an improper certificate validation vulnerability in Tanium Appliance. |
| Logic vulnerability in TP-Link Archer C20 v6.0 and Archer AX53 v1.0 (TDDP module) allows unauthenticated adjacent attackers to execute administrative commands including factory reset and device reboot without credentials. Attackers on the adjacent network can remotely trigger factory resets and reboots without credentials, causing configuration loss and interruption of device availability.This issue affects Archer C20 v6.0 < V6_251031.
Archer AX53 v1.0 <
V1_251215 |
| During session resumption in crypto/tls, if the underlying Config has its ClientCAs or RootCAs fields mutated between the initial handshake and the resumed handshake, the resumed handshake may succeed when it should have failed. This may happen when a user calls Config.Clone and mutates the returned Config, or uses Config.GetConfigForClient. This can cause a client to resume a session with a server that it would not have resumed with during the initial handshake, or cause a server to resume a session with a client that it would not have resumed with during the initial handshake. |
| SumatraPDF is a multi-format reader for Windows. In 3.5.0 through 3.5.2, SumatraPDF's update mechanism disables TLS hostname verification (INTERNET_FLAG_IGNORE_CERT_CN_INVALID) and executes installers without signature checks. A network attacker with any valid TLS certificate (e.g., Let's Encrypt) can intercept the update check request, inject a malicious installer URL, and achieve arbitrary code execution. |
| The server identity check mechanism for firmware upgrade performed via command shell is insecurely implemented potentially allowing an attacker to perform a Man-in-the-middle attack. This security issue has been fixed in the latest firmware version of Eaton
Network M3
which is available on the Eaton download center. |
| A vulnerability has been found in FAST/TOOLS provided by Yokogawa Electric Corporation.
This product does not
properly validate URLs. An attacker could send specially crafted requests to
steal files from the web server.
The
affected products and versions are as follows: FAST/TOOLS (Packages: RVSVRN, UNSVRN, HMIWEB, FTEES, HMIMOB) R9.01 to
R10.04 |
| A vulnerability has been found in FAST/TOOLS provided by Yokogawa Electric Corporation.
The web server accepts
access by IP address. When a worm that randomly searches for IP addresses
intrudes into the network, it could potentially be attacked by the worm.
The
affected products and versions are as follows: FAST/TOOLS (Packages: RVSVRN, UNSVRN, HMIWEB, FTEES, HMIMOB) R9.01 to
R10.04 |
| DataHub is an open-source metadata platform. Prior to version 1.3.1.8, the LDAP ingestion source is vulnerable to MITM attack through TLS downgrade. This issue has been patched in version 1.3.1.8. |
| The server identity check mechanism for firmware upgrade performed via command shell is insecurely implemented potentially allowing an attacker to perform a Man-in-the-middle attack. This security issue has been fixed in the latest firmware version of Eaton G4 PDU which is available on the Eaton download center. |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. When using `--auth-mode=client`, Archived Workflows can be retrieved with a fake or spoofed token via the GET Workflow endpoint: `/api/v1/workflows/{namespace}/{name}` or when using `--auth-mode=sso`, all Archived Workflows can be retrieved with a valid token via the GET Workflow endpoint: `/api/v1/workflows/{namespace}/{name}`. No authentication is performed by the Server itself on `client` tokens. Authentication & authorization is instead delegated to the k8s API server. However, the Workflow Archive does not interact with k8s, and so any token that looks valid will be considered authenticated, even if it is not a k8s token or even if the token has no RBAC for Argo. To handle the lack of pass-through k8s authN/authZ, the Workflow Archive specifically does the equivalent of a `kubectl auth can-i` check for respective methods. In 3.5.7 and 3.5.8, the auth check was accidentally removed on the GET Workflow endpoint's fallback to archived workflows on these lines, allowing archived workflows to be retrieved with a fake token. This vulnerability is fixed in 3.6.2 and 3.5.13. |
| An Improper Certificate Validation vulnerability in TP-Link Tapo H100 v1 and Tapo P100 v1 allows an on-path attacker on the same network segment to intercept and modify encrypted device-cloud communications. This may compromise the confidentiality and integrity of device-to-cloud communication, enabling manipulation of device data or operations. |
| Errands before 46.2.10 does not verify TLS certificates for CalDAV servers. |
| Alist is a file list program that supports multiple storages, powered by Gin and Solidjs. Prior to version 3.57.0, the application disables TLS certificate verification by default for all outgoing storage driver communications, making the system vulnerable to Man-in-the-Middle (MitM) attacks. This enables the complete decryption, theft, and manipulation of all data transmitted during storage operations, severely compromising the confidentiality and integrity of user data. This issue has been patched in version 3.57.0. |
| Amazon SageMaker Python SDK before v3.1.1 or v2.256.0 disables TLS certificate verification for HTTPS connections made by the service when a Triton Python model is imported, incorrectly allowing for requests with invalid and self-signed certificates to succeed. |
| A Local File Inclusion (LFI) vulnerability exists in the '/reinstall_extension' endpoint of the parisneo/lollms-webui application, specifically within the `name` parameter of the `@router.post("/reinstall_extension")` route. This vulnerability allows attackers to inject a malicious `name` parameter, leading to the server loading and executing arbitrary Python files from the upload directory for discussions. This issue arises due to the concatenation of `data.name` directly with `lollmsElfServer.lollms_paths.extensions_zoo_path` and its use as an argument for `ExtensionBuilder().build_extension()`. The server's handling of the `__init__.py` file in arbitrary locations, facilitated by `importlib.machinery.SourceFileLoader`, enables the execution of arbitrary code, such as command execution or creating a reverse-shell connection. This vulnerability affects the latest version of parisneo/lollms-webui and can lead to Remote Code Execution (RCE) when the application is exposed to an external endpoint or the UI, especially when bound to `0.0.0.0` or in `headless mode`. No user interaction is required for exploitation. |
| A third-party NAT traversal module fails to validate SSL/TLS certificates when connecting to the signaling server. While subsequent access to device services requires additional authentication, a Man-in-the-Middle (MitM) attacker can intercept or redirect the NAT tunnel establishment. This could allow an attacker to disrupt service availability or facilitate further targeted attacks by acting as a proxy between the user and the device services.
Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.ROF1 as well as from ADM 5.0.0 through ADM 5.1.1.RCI1. |
